| Property |
|
Method |
|
Requirements |
|
Results |
 |
| Liquid Tight Integrity |
|
NFPA 1991 8.3 |
|
No Penetration |
|
Pass |
| Ending Suit Pressure |
|
NFPA 8.4 |
|
≥ 80 mm H2O |
|
81.25 |
| Accommodates Head Protection |
|
NFPA 8.4 |
|
Yes |
|
Pass |
| Visual Acuity (TEC only) |
|
NFPA 8.4 |
|
≥ 20/35 |
|
20/20 |
| Remove/Reinsert Hands |
|
NFPA 8.4 |
|
5 times |
|
Pass |
| Maximum Suit Ventilation Rate |
|
NFPA 8.5 |
|
≤ 100 mm H2O |
|
35 |
| Gas Tight Integrity |
|
ASTM F 1052 |
|
≥ 80 mm H2O |
|
87.5 |
| Exhaust Valve Mounting Strength |
|
NFPA 8.9 |
|
> 135 N |
|
142.5 |
| Fitting Pull Out Strength (Dräger Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1323.5 |
| Fitting Pull Out Strength (Interspiro Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1317.1 |
| Fitting Pull Out Strength (ISI Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1321.4 |
| Fitting Pull Out Strength (MSA Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1329.4 |
| Fitting Pull Out Strength (Survivair Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1192.6 |
| Fitting Pull Out Strength (Scott Pass-thru) |
|
NFPA 8.13 |
|
> 1000 N |
|
1329.2 |
| Exhaust Valve Inward Leakage |
|
NFPA 8.26 |
|
≤ 30 ml/min |
|
9.5 |
| Flammability Resistance Afterflame – Garment Material (TEC only) |
|
ASTM F 1358 |
|
≤ 10 sec |
|
0.0 |
| Flammability Resistance Char Length – Garment Material (TEC only) |
|
ASTM F 1358 |
|
≤ 100 mm |
|
19 |
| Flammability Resistance No Melt or Drip – Garment Material (TEC only) |
|
ASTM F 1358 |
|
Up to 12 seconds |
|
Pass |
| Burst Strength – Garment Material |
|
ASTM D 751 |
|
> 200 N |
|
408.95 |
| Puncture Propagation Tear Resistance – Garment Material |
|
ASTM D 2582 |
|
> 49 N |
|
95.33 |
| Cold Temperature Performance – Garment Material (TEC only) |
|
NFPA 8.12 |
|
≤ 0.057 N x m |
|
0.001 |
| Seam Breaking Strength – Garment |
|
ASTM D 751 |
|
> 2.88 kN/m |
|
4.387 |
| Closure Breaking Strength |
|
ASTM D 751 |
|
> 2.88 kN/m |
|
7.039 |
| Flammability Resistance Afterflame – Visor Material |
|
ASTM F 1358 |
|
≤ 10 sec |
|
3.82 |
| Flammability Resistance Char Length – Visor Material |
|
ASTM F 1358 |
|
≤ 100 mm |
|
20.32 |
| Flammability Resistance No Melt or Drip – Visor Material |
|
ASTM F 1358 |
|
Up to 12 seconds |
|
Pass |
| Cold Temperature Performance – Visor Material |
|
NFPA 8.12 |
|
No Crack or Visible Damage |
|
Pass |
| Seam Breaking Strength – Visor |
|
ASTM D 751 |
|
> 2.88 kN/m |
|
4.027 |
| Burst Strength – Visor Material |
|
ASTM D 751 |
|
> 200 N |
|
893.46 |
| Puncture Propagation Tear Resistance – Visor Material |
|
ASTM D 2582 |
|
> 49 N |
|
> 923.5 |
| Inward Leakage |
|
NFPA 8.8 |
|
≤ 30 ml/min |
|
9.5 |
| |
